Thread: Fishing cart axle lubrication
-
12-29-2017, 10:24 AM #1
- Join Date
- Mar 2015
- Location
- Foley, AL
- Posts
- 160
- Thanks
- 217
- Thanked 157 Times in 58 Posts
Fishing cart axle lubrication
I wonder what is the best lubrication is for pier/surf cart tires and axles as when I used the hard rubber tires the plastic was wearing out from the metal axles and when I switched to an orange balloon tire kit the same happened, I did follow the listed lube recommended but the noise and wear continues so I switched to "Blaster dry lube" from an auto parts store and that works but needs reapplying from time to time.
-
12-29-2017, 11:06 AM #2
- Join Date
- Apr 2013
- Location
- Foley, AL
- Posts
- 1,604
- Thanks
- 1,213
- Thanked 1,825 Times in 516 Posts
The instructions with mine said silicone spray ONLY, but I have balloon tires.
People are shocked to see sharks in the water around here.
If you see natural water taste it. If it's salty it has sharks in it. If it's fresh it has alligators in it. If it's brackish it has both.
-
12-29-2017, 12:29 PM #3
- Join Date
- Nov 2015
- Location
- Newnan Ga.
- Posts
- 696
- Thanks
- 289
- Thanked 255 Times in 138 Posts
With metal to plastic contact the softer will wear , the plastic . I have both types of wheels and I know that at some point I'll have to replace the wheels or come up with a bushing / bearing setup , As for now I spray them with silicon spray after I hose them off, do the
rods and reels at the same time .If you are going to fight, fight like you are the third monkey on the ramp to Noah's ark and brother, it's starting to rain!
-
12-29-2017, 03:29 PM #4
Mine has a zerk greese fitting but came factory lubed. ...they are wheel barrow wheels from rural king steel bearings and rim (300 lb capacity) replaced the ballon tires
Bill..............
Be careful going home, sons wife is from upper Iowa, her grandmother passed today so they will be headed up shortly, hope all that is gone by the time you all get there
It's over